500KW To 5MW Hydropower Equipment Pelton Hydraulic Turbine Generator

500KW To 5MW Hydropower Equipment Pelton Hydraulic Turbine Generator

Introduction of Hydraulic Pelton Turbine

冲击液压涡轮机是一种液压原动机，其工作喷射中心线与车轮间距圈切相切，并且流道叶片由一系列双碗状桶组成。根据主轴的布置，它分为两种水平轴和垂直轴，无论哪种跑步者总是位于大气中。这种类型的涡轮机适用于高头和小流量水电站。

Pelton Turbine Components

1. Nozzle and Flow Regulating Arrangement (Spear)
Nozzle is used to increase the kinetic energy of the water that is going to strike the blades or vanes attached to the runner.
The quantity of water that strikes the blades is controlled by spear. The needle is installed inside of nozzle and regulates the flow of water that is going to strike on the vanes of the runner. A nozzle containing needle .
The conical needle present in the nozzle. It is operated by a hand wheel or automatically in an axial direction.
When the needle is move backward, the flow rate of water is increasesing and when it is pushed forward, the flow rate of water decreasesing.

2. Runner and Buckets
Runner is a rotating part of the turbine. It is a circular disc on the periphery of which a number of buckets evenly spaced are fixed.
The buckets are made by two hemispherical bowl joined together. Each buckets have a wall in between two hemispherical bowl called splitter.
分离器将铲斗的水射流分成两个相等的部分，水射流出现在铲斗的外缘。
The buckets are designed in such a way that the jet of water strike the buckets, deflected through 160 degree to 170 degree.
佩尔顿涡轮机的铲斗由铸铁，铸钢青铜或不锈钢组成。

3. Casing
It prevents the splashing of the water and helps to discharge the water to the trail race. It also acts as a safeguard in the case of any accident occurs.
Cast iron or fabricated steel plates are used to make the casing of the 1000kw pelton hydro turbine generator.

4. Breaking Jet
当通过向前向前向前向前的矛盾完全关闭水的射流时，撞击者变为零。但仍然跑步者由于跑步者的惯性而导致移动。
为了在最短的时间内停止转轮，提供小喷嘴，该喷嘴引导叶片背面的水射流。这种用于停止涡轮机的跑步者的水被称为断裂射流。

产品图片

Product Parameters

Our Workshop

FAQ

Q1, Which turbine should I choose?

Please tell me the water head, flow rate, frequency, Total power you need

voltage, on grid or off grid operation, we will propose a solution.

Q2，您的工厂是否可以为水电站提供所有设备？

Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.

Q3, Can you do EPC for a hydroelectric power plant?

是的，我们可以提供元件和EPC服务，包括测量，设计，制造，施工，制造，调试，检查，维护跑步者更换和翻新/升级/改进/修复/翻新包括轴承，零件密封件和零件的密封件关键部分，我们将送技术人员和工人安装设备。

Q4,Is your company a trading company or a manufacturer?

We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.

Q5, What is an acceptable MOQ?

For this product, our acceptable MOQ is 1 set.

Q6,How long is the delivery time?

Delivery times range from 15 days to 6 months depending on the model you are purchasing.

Q7，贵公司是否拥有自己的独立官方网站？

Of course, and we can see more information about our company and products on our official website. website address: www.lqwzhbj.com